MyRepublic Wi-Fi Halo: Setting it Up

Download the Wi-Fi Halo Quick Start Guide here. Or the full User Manual here.

Getting connected: The Internet

 

Connect_Halo_to_internet.png

  1. Plug one end of the power adapter into an electrical outlet, and the other end into the MyRepublic Wi-Fi Halo.
  2. Connect an Ethernet cable between the Red WAN port on the back of the MyRepublic Wi-Fi Halo to the port 1 on the ONT (Alcatel Lucent) installed by your technician.
  3. Once everything is connected, power on the MyRepublic Wi-Fi Halo using the button located at the back of the device.
  4. Your device will power on.

 

Getting connected: Devices

Getting_connected.png

  • Connect any Ethernet devices to the yellow ports on the back of the MyRepublic Wi-Fi Halo
  • Connect any Wireless devices to the MyRepublic Wi-Fi Halo using the password provided on the Wi-Fi Security Card and/or printed at the bottom of the router.
    • If you'd like to customise your Wi-Fi username or password, check out our guide here.
    • Your device should now be up and running, if you have any issues simply reboot the device and wait for it to power on. If this does not resolve the problem, refer to our troubleshooting section for support.

Did this article answer your question?

If not, please contact our Customer Service Hotline at 6717 1680.
Residential Hotline 6717 1680
Business Hotline 6816 0088
Gamer Hotline 6815 1337
Sales Hotline 6816 0099
General/ Billing/ Gamer Hotline: Mon to Sun
9am to 9pm
Technical Hotline: Mon to Sun
24hrs
Email Support - myservice@myrepublic.net
Live chat: Mon to Fri
9am to 6pm (excl. public holidays)
Address
11 Lorong 3 Toa Payoh
#04-11/15, Jackson Square Block B
Singapore 319579
Powered by Zendesk